Notes

1. The minimum OS for the Ex000 is Solaris 2.5.1.
2. The minimum OS for the Ex500 is 2.5.1 HW: 11/97 or 2.6 HW: 3/98.
3. The first release of OBP for the 501-4882 was 3.2 Version 12.
4. The oldest supported release of OBP for the 501-4882 is 3.2v14.
5. OBP 3.2v14 is required when 83MHz and 100MHz boards are mixed.
6. Refer to the Install.info file of any Firmware patch for information on firmware verification and compatibility.

Compatibility Notes

1. The 501-4882 was shipped in the E3500 - E6500.
2. The 501-4882 was not shipped in the E3000 - E6000.
3. The 501-4882 is supported in the E3000 - E6000 and E3500 - E6500.

Flash PROM Notes

1. Use the Flash PROM Programming Utility to update the flash PROM.
2. Use the prom-copy (src dst -) command to copy a flash PROM.
   

   ok 2 b prom-copy (copies from board 2 to board 11)

3. Use the update-proms command to synchronize the latest version of flash PROM installed in the system to all boards of the same type.

Module Notes

1. The 400MHz 4MB module requires OBP 3.2 Version 18.
2. The 400MHz 8MB module requires OBP 3.2 Version 21.
3. The 464MHz 8MB module requires OBP 3.2 Version 29.