Sun 501-6637-01 Fire V60x/V65x Dual 2.8Ghz System Board, 0CPU, 0Mb

Home > System Boards >

Sun original product.

Our Price: £995.00

Availability:: Usually Ships in 24 Hours
Product Code: 501-6637-01

Qty:

Description

Technical Specs

Extended Information

SunFire V60x/V65x Dual 2.8Ghz System Board, 0CPU, 0Mb
Sun Part Number 501-6637-01
Sun Original Product

LOCATION	PINS	SETTING	DESCRIPTION
J1A1	2	NA	HDD LED - not used
J1D3	10	NA	USB Cable to Front Panel
J1G1	34	NA	Floppy - not used
J1G2	40	NA	IDE - not used
J1G4	34	NA	Front Panel - not used
J1H1	24	NA	NMI/RST/LED - not used
J1J1	5	NA	I²C to Power Distribution Board
J2G1	6	NA	Floppy/Front Panel/IDE
J2J1	6	NA	V65x Fan Tray Power
J3J1	24	NA	Power to Power Distribution Board
J3J2	12	NA	V60x/V65x Fan Tray Power
J4J1	8	NA	12V to Power Distribution Board
J4J2	2	NA	CPU1 Fan - not used
J7A2	2	NA	Chassis Int - not used
J7B1	68	NA	SCSI Cable to Backplane Board
J7J1	2	NA	CPU2 Fan - not used
J9A2	10	NA	Serial Port A - V65x requires Option 5137
J9B1	5	NA	ICMB - not used
J9C1	3	NA	IPMB - not used
J1D4	1-2 2-3 5-6 6-7 9-10 10-11	In In In In In In	Normal CMOS Operation (default) Clear CMOS Normal Password Operation (default) Clear Password Normal BIOS Operation (default) BIOS Recovery
J4B2	1-2 2-3	Out In	BMC Boot Block Write Enabled BMC Boot Block Write Protected (default)
J5A2	1-2 3-4	In In	DCD connected to Serial Port Pin-7 DSR connected to Serial Port Pin-7 (default)

Xeon 2.8GHz and 3.06GHz core processor stepping changed from C-1 to D-1 in August 2003.
The 2.8GHz and 3.06GHz CPU ID changed from 0F27h (C-1) to 0F29h (D-1).
D-1 2.8GHz and 3.06GHz core processor stepping requires BIOS 1175.
C-1 2.8GHz, f370-6044-01 and 595-6943-01, packaging is labeled MM# 851285.
D-1 2.8GHz, f370-6044-02 and 595-6943-02, packaging is labeled MM# 854973.
C-1 3.06GHz, f370-6045-01 and 595-6944-01, packaging is labeled MM# 851912.
D-1 3.06GHz, f370-6045-02 and 595-6944-02, packaging is labeled MM# 853093.
M-0 3.2GHz core processor stepping requires BIOS 1191.

The Sun Fire V60x and V65x System Board is not a Field Replacable Unit.
BIOS updates for V60x are available at V60x SW 9.0.
BIOS updates for V65x are available at V65x SW 9.0.
Install memory in pairs, beginning with Bank 1, Slots 1A and 1B.
Do not connect a USB pointing or storage device prior to network boot (PXE).
Do not connect a USB keyboard if the LILO boot loader is installed
USB ports are disabled until the system is booted and USB drivers are installed.
Use a PS/2 Keyboard if a keyboard is required for initial bootup and configuration.
Press F2 during bootup to enter the BIOS menu.